客戶服務YE

掃二維碼在線咨詢

微信咨詢

給我們留言

在線客服
  1.   HOME | Message | Copyright: | Admin
    中文版 | English
     
    >> PRODUCT CATEGORY
    >> CONTACT US
     
    OLAT PRINTING MACHINERY INDUSTRY CO.,LTD

    TEL:+86-13862636990   +86-512-5706 8888 
    FAX::+86-512-5706 8800
    E-mail:chinaolat@126.com
    Contact:   Ye Qiao Yun  

     
      TRAIN
     
     

    Silk screen printing ink when some matters needing attention

    Date:2013/5/2 15:29:47 Hits:5107
     

           Before (1) silk screen printing ink, with cyclohexanone or other open water dilute and fully mixing, stirring evenly, let stand 20 minutes above used again, let the bubbles automatic overflow, otherwise, the bubble will be made by screen printing scraper scraping back and forth to print to the printing design, later bubbles burst, and prompted a pinhole printing design (blister), once appear this kind of situation, later it will be hard to make up for the defect.
    (2) when the weather is dry printing, printing ink inside add slow dry agent in order to prevent plugging.In case of screen blocking happens, usable cotton dips in positive and negative swab cyclohexanone screen, to wipe through mesh before printing.Rainy day, inside the ink amount added to speed up the drying agent (or dry), otherwise the printing speed is too slow, lead to the low yield.

    (3) more matching color printing, the printing order: the light - medium - dark.In a pattern, at the same time, there are scattered flowers and on-site printing, printing order: scattering flowers to the ground.When the first color surface drying, and then print of a color, and so on, until all the color printing.

    (4) with fine lines or small dot pattern in design, should not be commonly added to speed up the printing ink dry agent, in this case, right amount add slow drying agent as well, as to add the exact proportion, should be depending on air dry wet at that time.

    (5) after all the color printing, although visual or touch the surface of the ink was dry, but that's just the surface drying, printing design has not fully dry, therefore, when the winding, printing product can not be stacked high layer, so as to avoid printing surface is taken off layer after stress, only temporary stacking before shipment delivery, guarantee the quality of the products to the largest extent.

    (6) different manufacturers, different varieties of ink is mixed with each other, especially the different varieties of ink must not mix use, for example: PVC ink can not be used with nylon inks, other varieties of ink.Why: mix after printing, it is difficult to found the problem at that time, in a few hours later, printing surface will gradually change color, design change, turbidity, cracking and even design.Of course, there are printing plant to reduce printing costs and risks in nylon PVC ink printing ink to add.Why bother?Province is also not a few money, one thousand out of the question, is too late to regret.

      Home About UsProduct Special promotions Case  News  Train  Message  Contact Us
    Links: Huai'an OLAT Pad PrintingScreenPrinting(Northern distribution)
    Copyright::OLAT PRINTING MACHINERY INDUSTRY CO.,LTD.
    ADD:No.9?Zhangji?Road?Economic?Development?Zone,?Kunshan,?Jiangsu?Province
    TEL:0512-57068888 FAX:0512-57068800
    精品国产亚洲一区二区三区完整版_亚洲性色午夜无码一区二区三区_免费高清欧美亚洲视频_亚洲一区二区黄色网站
    1. 日本亚洲精品色婷婷在线影院 | 亚洲国产综合在线区尤物 | 亚洲一区二区精品动漫 | 亚洲午夜在线观看首页 | 五月天丁香婷婷最新 | 日本国产欧美在线观看 |